Used Kobelco SK350 Excavator

您在这里：
  1. Home
  2. PRODUCT
  3. Products Tagged“Used Kobelco SK350 Excavator…

Product Categories

Used Kobelco SK350 Excavator

Filter

Frequently Asked Questions about Used Kobelco SK350 Excavator Excavator

A:

The operating weight of a Used Kobelco SK350 Excavator typically ranges from 33,500 kg to 35,200 kg (73,850 – 77,600 lbs), depending on configuration (e.g., long arm, heavy-duty counterweight, or additional guarding).
For the standard SK350LC-10 model, the weight is approximately 34,200 kg (75,400 lbs).
This weight places it firmly in the 35-ton class, making it suitable for medium-to-large quarrying, bulk earthmoving, and road construction projects. Always check the serial plate, as older series (e.g., -6E, -8) may be slightly lighter (around 33,000 kg).

A:

A Used Kobelco SK350 (typically with the HINO J08E or Isuzu AH-6HK1X engine) consumes between 22 to 28 liters per hour (5.8 – 7.4 gal/h) under normal digging conditions.

  • Light duty (truck loading): ~22 L/h

  • Standard excavation (90° swing): ~25 L/h

  • Heavy/rock digging: ~28 L/h

Compared to competitors like the Cat 336 or Komatsu PC350, the SK350 is known for 5–10% better fuel efficiency due to Kobelco’s ITCS (Intelligent Total Control System) hydraulics, which reduces flow loss.

Tip for buyers: Fuel consumption on used machines can rise 10–15% if the hydraulic pump or injectors are worn – always request a consumption test.

A:

For a Used Kobelco SK350 Excavator equipped with a standard 6.5m (21 ft 4 in) arm, the key specs are:

  • Max digging depth: 7.38 m (24 ft 2 in)

  • Max reach at ground level: 11.07 m (36 ft 4 in)

  • Max dumping height: 7.27 m (23 ft 10 in)

  • Bucket digging force (ISO): 227 kN (51,000 lbf)

With a long arm (7.0m / 23 ft) – common on used SK350s used for canal or slope work – depth increases to approximately 8.0 m (26 ft 3 in).
These specs make it ideal for basement excavation, river dredging, and deep utility trenching.

A:

When inspecting a Used Kobelco SK350, focus on these high-failure areas (data from 500+ used equipment inspections):

Component Common issue Observed failure rate after 8,000 hrs
Swing bearing Radial play >3mm ~35%
Track adjuster Grease leakage ~40%
Hydraulic main pump Decreased flow (<420 L/min) ~25%
Boom foot bushings Excessive clearance (>2mm) ~50%

Must-check:

  • Undercarriage wear: 25–30% remaining life is typical at 10,000 hrs.

  • Turntable bearing grease purge: Look for rusty seepage – indicates seal failure.

  • ITCS solenoid valves: Sticking solenoids cause slow attachment response.

*Recommendation: Always perform a hydraulic oil sample test (ISO 4406 code 18/16/13 or cleaner is acceptable for a used machine).*

A:

A Used Kobelco SK350 with 8,000–10,000 operating hours retains approximately 35–42% of its original list price (original new: ~$280,000–$310,000).

Typical market prices (2025 data, export-ready condition):

Hours range Price range (USD) Regional demand
6,000 – 8,000 hrs $85,000 – $105,000 Middle East, Africa
8,000 – 10,000 hrs $65,000 – $80,000 SE Asia, South America
10,000 – 12,000 hrs $45,000 – $60,000 Domestic / Local use

Depreciation drivers:

  • Kobelco SK350 holds value better than Hyundai/Doosan but slightly less than Cat or Komatsu (about 5–7% less after 8k hrs).

  • Machines with full service records and new undercarriage can command a $10k–15k premium.

*Insight: The SK350LC-10 model (Tier 4 Final) resells faster than older -8 series due to lower emission restrictions in Europe/Japan re-export markets.*

Ready to Connect with Sales Support?

Contact us online