Komatsu PC360

The Komatsu PC360 is a 36-ton class hydraulic excavator available in multiple variants, including the latest PC360-11 (LC/NLC) series and the previous PC360-10 generation. Below are the detailed specifications verified by official Komatsu data .

Complete Specifications Table (PC360LC/NLC-11 – Current Model):

PC360LC-10 (Previous Generation) Specifications:

Hydraulic System Features:

• CLSS (Closed Load Sensing System) hydraulics for precise control and fast response

• Lift Mode – Increases lifting force by up to 6% with operator selection

• Auxiliary Hydraulic Flow – 200-250 L/min (53-66 GPM) for attachments

Transport Dimensions:

• Transport Length: Approx. 11,150 mm (36.6 ft)

• Transport Width: 3,190 mm (10.5 ft) – NLC variant has narrower undercarriage for transport

The PC360 is available in multiple configurations: LC (Long Crawler) for stability, NLC (Narrow Long Crawler) for transport convenience, and iMC 2.0 variants with intelligent Machine Control technology .

The Komatsu PC360 offers excellent fuel efficiency for its class. The latest -11 series achieves up to 5% lower fuel consumption compared to previous models, while the -10 series delivered up to 13% reduction over earlier generations .

Fuel Consumption Estimates (Based on industry data):

Fuel Efficiency Features on PC360-11:

1. Komatsu EU Stage V Engine – Advanced electronic control system manages airflow rate, fuel injection, and combustion parameters for optimal efficiency

2. Auto Idle Shutdown – Automatically shuts down engine after preset idle time, eliminating unnecessary fuel waste

3. Neutral Detection System – Reduces engine RPM when controls are in neutral for more than 4 seconds

4. KOMTRAX Fuel Management – Real-time fuel consumption monitoring and reporting via telematics

Fuel Saving Tips for PC360 Operators:

Fuel Tank Capacity: The PC360 has a large fuel tank (approximately 605 L / 160 gal), allowing for 27-35 hours of continuous operation between refueling stops, depending on workload intensity.

Cost Calculation Example (at $1.00/L diesel, 2,000 hours/year):

• Annual fuel consumption: 40,000 – 52,000 L

• Annual fuel cost: $40,000 – $52,000

• With 5% fuel savings from efficient operation: $2,000 – $2,600 saved annually

The Komatsu PC360 features a powerful hydraulic system that supports a wide range of heavy-duty attachments, making it highly versatile for construction, demolition, quarrying, and waste management applications.

Hydraulic System Capabilities:

• Auxiliary flow: 200-250 L/min (53-66 GPM)

• System pressure: 23-26 psi (160-180 kg/m²) standard

• Up to 15 programmable flow and pressure settings for different tools

Compatible Attachments and Specifications:

PC360LC-11 Demolition Excavator Features :

• Factory-made straight boom for added reach (maximum digging height: 12.9 m / 42.5 ft)

• Heavy-duty wraparound side protection and undercovers

• Proportional joystick controls for precise attachment movement

• Programmable settings for up to 15 different tools

Waste Management Package (PC360LC-11 WH) Features :

• Auto reversing fan to minimize debris damage

• Engine pre-cleaner for extended air filter life

• Wide core cooling package to reduce debris accumulation

• Chassis seal package to protect vital components

• 9-mm thick severe duty revolving frame under covers

Attachment Selection Guide:

Important: Always verify attachment weight and hydraulic flow requirements with the machine’s specifications. The PC360 supports up to 15 programmable flow/pressure settings, allowing quick switching between multiple attachments .

Following the manufacturer’s recommended maintenance schedule is critical for maximizing the PC360’s service life and minimizing downtime. Below is the comprehensive maintenance schedule based on Komatsu’s official guidelines .

Daily Maintenance (Every 8-10 hours / Before Start):

Every 50 Hours (Weekly):

Every 250 Hours:

Every 500 Hours :

Every 1,000 Hours :

Every 2,000 Hours :

Every 5,000 Hours :

Undercarriage Inspection Checklist :

Key Maintenance Tips:

• The PC360iMC-11 features an intelligent diagnostic system on the LCD monitor

• Use KOMTRAX telematics to track maintenance intervals and receive alerts

• The auto reversing fan on waste/demo packages helps keep cooling package clean

• Always use genuine Komatsu filters and fluids for warranty compliance

Komatsu offers multiple variants of the PC360 platform, each designed for specific applications, emission standards, and technological capabilities. Understanding these differences helps buyers select the right machine for their needs.

Model Comparison Table:

Detailed Variant Descriptions:

1. PC360LC/NLC-10 

• The “dash 10” generation introduced significant fuel savings (up to 13%)

• Features Komatsu’s CLSS hydraulics and SpaceCab™ safety design

• Available in LC (Long Crawler) and NLC (Narrow Long Crawler) configurations

• Emission standards: Tier 4 Interim / Stage IIIB

• Now in product archive (discontinued but widely available used)

2. PC360LC/NLC-11 

• Current base model with EU Stage V / Tier 4 Final engine

• Integrates SCR technology with AdBlue® additive for NOx reduction

• 5% fuel consumption reduction compared to -10 series

• Auto idle shutdown and neutral detection system for additional fuel savings

• Available in demolition and waste handling (WH) packages

3. PC360LCi-11 (iMC 2.0) 

• Intelligent Machine Control 2.0 with advanced automation features:

  • Auto Tilt Control – Easier operation of tilting buckets on slope and ditch work

  • Automatic Limit to Under-digging – Prevents digging below design surface

  • Bucket Angle Hold – Automatically maintains bucket angle during grading passes

  • Auto Grade Assist – Helps maintain grade without manual intervention

• Updated iMC 2.0 monitor: 36% slimmer, 38% lighter than previous version

• Improved touchscreen navigation and increased memory

• Tilt Bucket Integration via IMU sensor for various bucket types

• Smart Construction Remote subscription allows remote design file transfer

LC vs. NLC (Narrow Long Crawler) Undercarriage :

Specialized Packages:

Which Model Should You Choose?

Pro Tip: The iMC 2.0 models can replace both standard excavators and dozers on grading applications, allowing fleet optimization and equipment redeployment .