Used Volvo EC380 Excavator | Low Hours | Ready to Ship

The operating weight of the Used Volvo EC380 Excavator typically ranges between 37,500 kg and 39,500 kg (82,700 – 87,100 lbs) , depending on configuration (e.g., long arm, heavy-duty undercarriage, or additional counterweights). The standard EC380E model weighs approximately 38,500 kg with a 6.5m boom and 3.2m arm. This weight range places it firmly in the 35–40-ton crawler excavator class, making it ideal for medium-to-large earthmoving, quarry work, and heavy infrastructure projects. When purchasing used, always verify the exact weight via the machine’s serial plate, as modifications or attachments (e.g., hydraulic quick coupler, extra track pads) can add 500–1,500 kg.

Under standard working conditions (mixed digging and loading cycles), the Used Volvo EC380 Excavator consumes between 22 to 28 liters per hour (5.8 – 7.4 gallons per hour) , depending on operator technique, material density, and attachment type. In heavy-duty applications (e.g., rock quarry, deep trenching), consumption may reach 30–32 L/h. Compared to competitors like the Caterpillar 336 (26–30 L/h) or Komatsu PC360 (24–28 L/h), the Volvo EC380 is considered fuel-efficient in its class, thanks to the Volvo D13 engine with optimized hydraulics and ECO mode. For used machines, expect a 5–10% increase in fuel use compared to factory-new due to normal engine wear. Regular maintenance (clean injectors, proper air filters) can keep consumption below 26 L/h even at 8,000–10,000 operating hours.

For a Used Volvo EC380 Excavator, “low hours” typically means under 5,000 engine hours. Machines with 3,000–4,500 hours are highly sought after because:

• Major components (pump, swing motor, travel motors) still have 60–70% service life remaining.

• Undercarriage wear is usually moderate (30–50% life left).

• The Volvo D13 engine, properly maintained, can run 12,000–15,000 hours before overhaul.

Machines between 5,000–8,000 hours are considered average usage, while those above 10,000 hours are high-hour units requiring thorough inspection. For comparison, rental fleet EC380s often see 2,000–2,500 hours per year. A 2018 EC380E with 4,200 hours is typically priced 35–40% below new, offering excellent value for cost-conscious buyers.

Prices for a Used Volvo EC380 Crawler Excavator vary significantly by year, hours, condition, and location. As of 2026, typical market ranges (FOB major port, e.g., Shanghai, Rotterdam, Houston):

Note: EC380E (Stage IV / Tier 4 Final) models command a premium due to lower emissions. Machines with hydraulic quick couplers, extra buckets, or new undercarriage add $5,000–$12,000. Always request a full inspection report (e.g., by a third-party like SGS or Asia Mach) before pricing negotiation.

When inspecting a Used Volvo EC380 Excavator, focus on these five common wear points based on field data from 200+ used units:

1. Undercarriage wear – Measure track sag and link height. Over 15% worn = $6,000–$8,000 replacement cost.

2. Swing bearing / slewing ring – Check for vertical play (>3mm indicates replacement needed soon). Cost: ~$4,500 + labor.

3. Hydraulic pump pressure – Should maintain 32–35 MPa at full load. Dropping below 28 MPa suggests worn internals (rebuild: $3,000–$5,000).

4. Boom and arm pin/bushing play – Excessive play (>5mm) leads to poor digging precision and accelerated wear.

5. D13 engine – turbo and injectors – Inspect for black smoke under load. Failed injectors are common after 8,000 hours (~$200 each).